Fiberglass

1. Perform a great preparation of the natural nail, applying the Nail Prep, Binder and/or Primer preparers (depending on your specific needs) and removing the cuticles if necessary; Shortens and rounds the free edge of the nail. Apply Primer only to the nail plate, not to the tip.
2. Choose the most suitable size gel tip, checking that the sides are well covered; If necessary, the base can be filed to adapt it perfectly to the nail surface.
3. Mattify the inside of the base with the help of the buffer or using a cylindrical cutter bit, such as the Dry Diamant Barrel, then remove dust and residue; for better adhesion, apply Binder Acid Free (not Primer) on the back of the tip, in the part that will rest on the nail plate.
4. Now apply HD Base Nail Polish on the surface of the nail; then apply a layer of nail polish on the back of the tip in the part that will rest on the nail plate, and then a drop on the base.
5. Place it on the nail, making sure that it adheres perfectly; Lay the base down first, moving slightly away from the cuticle circumference, then the entire tip going down towards the free edge. In this step, it is important that no air bubbles are created; to avoid this, it is necessary to dose HD Base well, so that it totally fills the space between the nail and the preformed structure.
6. Perform a first polymerization with the One Touch lamp for 30 seconds, keeping the tip pressed on the nail, then cure in a UV/LED lamp for another 30 seconds.
7. Remove the step at the base of the structure and any excess product spilled from the side, using the Carbide Precision Tip or a 180/240 grit file.
8. File the free edge to finish the shape, then matte it with the help of the Buffer File and remove any traces of dust.
9. Apply HD Base, creating a small convex if you prefer, then cure and proceed as desired, applying color or decorations.

Cures in UV/LED lamp in 30 seconds or in UV lamp in 120 seconds

Carefully mattify the surface with a buffer or a suitable file.
Pour Remover onto a pad and place it on your fingernail; Secure it with the Removal Caps and wait about 10 minutes.
Now remove the residue with a Pusher or a tool such as Orange Sticks.
Alternatively, it is also possible to proceed with the removal using a cutter and/or file.

Note:
Do not use alcoholic products such as Fresh & Pure on the gel tips or primers.

Attention:
Keep away from heat sources. Keep out of reach of children. Do not swallow. Do not apply to damaged nails.